ELEAF ISTICK PICO 85W
The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. With a compact size, you can hold it in the palm, much more convenient for usage and portability.
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW mode)
Big 0.91-Inch Screen with Optional Interfaces
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.
The iStick Pico 25 can handle various tanks up to 25mm diameter.
2A Quick Charge Capability
With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much quicker than conventional 1A max.
Replaceable 18650 Battery
The iStick Pico 25 is powered by a single 18650 battery, allowing you to switch and replace the battery as needed.
Firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable and following the instructions provided by Eleaf here (scroll to bottom of page).
The Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a smoother vaping experience. And the firmware is upgradeable to be always the latest.
Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.